Home Water Treatment

Advanced Water Treatment

The process

5 stages, one continuous flow

Each stage targets a specific class of contaminant — nothing skipped, nothing left to chance.

STAGE 01

Sediment Filter

5-micron spun filter strains sand, silt, dust & rust before water enters the system.

STAGE 02

Carbon Block (x2)

Activated carbon adsorbs chlorine, pesticides, bad odour and discolouration.

STAGE 03

RO Membrane

A semi-permeable membrane rejects dissolved salts, fluoride, arsenic & heavy metals down to 0.0001 micron.

STAGE 04

UV + UF Sterilisation

Ultraviolet light and ultrafiltration neutralise bacteria, viruses and cysts without chemicals.

STAGE 05

Mineral Cartridge

Reintroduces calcium & magnesium for taste and health, balancing the pH of the final output.

Measured, not assumed

Output quality after treatment

Every installation is tested on-site and logged against these benchmarks.

92%
TDS Reduction
99%
Bacteria Removal
88%
Heavy Metal Rejection
95%
Chlorine & Odour Removal
Source vs. treated

What changes after treatment

ParameterTypical Source WaterAfter Neerkart TreatmentSafe Limit (BIS)
TDS (ppm)600 – 120050 – 120≤ 500
Hardness (mg/L)300 – 50040 – 80≤ 200
ChlorinePresentNot detected≤ 1 mg/L
Bacteria / PathogensPossibleNot detectedAbsent
Turbidity (NTU)2 – 8< 1≤ 1

Figures are typical ranges observed across serviced areas and vary by source; every installation is tested on-site before handover.

RO, UV, and UF Technologies
Why combine RO, UV & UF

No single technology does it all

RO alone removes dissolved salts but not always live microorganisms fast enough; UV alone doesn't touch dissolved solids. Combining all three closes every gap.

  • RO targets dissolved salts, fluoride & heavy metals
  • UF removes suspended solids & larger microbes
  • UV neutralises bacteria & viruses instantly, chemical-free
Get Your Water Tested

Curious what's in your tap water?

We run a free on-site TDS & hardness test and explain the results in plain language.

Book Free Water Test